Last Updated on November 1, 2022 by acechapman
Sometimes, you might need to remove the plastic nut from your toilet tank. Although it seems simple, it can be difficult and costly. This article will show you how to take out the plastic nut from your toilet tank.
First, drain the water from the toilet tank before you can begin removing the plastic nuts. You can then remove the plastic nuts with pliers or an adjustable wrench.
There are many situations that can lead to plastic nuts being removed. This step-by-step guide will show you how to remove plastic nuts from the toilet tank.
The importance of learning how to remove plastic nuts.
Toilet leakage can lead to a need to replace the lock nut with a new one. This will prevent any damage to the floor or mess. It is a good idea to replace any rusted or damaged nuts. To ensure your toilet is clean and safe, you must follow the correct techniques.
How to get rid of plastic nuts from your toilet tank
Turn off the water supply
First, shut off the water supply to the toilet. To do this, follow the water supply line. The valve will be visible on the wall once you have reached the point where your hose meets the valve. To shut off the water supply, turn the handle to your right.
Draining the water from the tank
The next step is to drain the toilet tank water. To do this, first, remove the lid from the tank. You can then drain the tank by pushing it down on the handle. Continue until the water runs out. To soak up any water remaining, you can use a sponge or towel.
Removing process
Once you have completed this step, you can begin the removal process. You can first place a towel under the tank. Next, remove the plastic part that connects to the water supply hose and the underside of the toilet tank.
Next, locate the locknut. You can find this large plastic nut above the location to which the coupling was attached. You can then remove it using either a pair or an adjustable wrench.
What happens if the lock nut gets stuck?
If you use the correct method, it should not be difficult to remove the plastic nut. There are occasions when the lock nut might become stuck and a different technique may be required. There are two options.
- You can try to lubricate the nut with a hot towel to loosen it. Then, you can remove it using a strap wrench and a basin wrench.
- Use regular pliers to remove it. It is best to use the pliers with the wide setting, and slightly wider than the nut. Rotate the pliers by holding the pliers against either the top or bottom of the nut.
Remove Rusted Screws, Wingnuts, And Other Items From The Toilet Tank
It’s normal to notice that the attached screws have become rusted when removing the toilet wingnuts. However, there are solutions. You will first need to lubricate the nut with WD-40. Wait for it to release. You can then remove the nut with a wrench or pliers.
Remove a plastic lock nut that was stuck under the toilet
You may think that if a lock nut is stuck underneath the toilet, it can be cut with a saw. However, this is not the only way to solve the problem. The best method is to heat the nut and melt it.
You can use a heating torch to heat the water and then place it under the locknut. You must also ensure that the heating torch doesn’t cause damage to any other parts of the plastic. Hot water is a good alternative to a heater torch, even if you don’t have one.
Wrapping up
We trust you found this article useful and understand how to remove the plastic nut from the toilet tank. We have not only explained the best way to do it but also discussed some possible situations that you might encounter when removing plastic nuts from the tank.
These situations include removing stuck lock nuts, removing old screws, and removing the locknut that is stuck under the toilet. You can remove plastic nuts from toilet tanks by following these steps and instructions.
Pick A Toilet may collect a share of sales or other compensation from the links on this page.
