Last Updated on November 16, 2022 by acechapman
A vanity can increase the value of a bathroom. However, it can be difficult when replacing a pedestal sink. Before you can do any other things, shut off the water supply and remove the P trap. We will walk you through the 10 steps to install a vanity and remove a pedestal sink.
Replacing Your Pedestal Sink To Bathroom Vanity
Many people feel the need to remodel their bathrooms. It can be very refreshing to change up fixtures after getting tired of seeing them over and over again. You can replace your pedestal sink with a bathroom vanity.
Start by turning off the water supply to the pedestal sink and then unscrewing the hose. Remove the sealant around the sink and the P-trap. You can then remove the sink by loosening the screws or the adhesive.
Use a stud locator to locate a place for the vanity and mark it on the wall. If necessary, create openings at the back of your vanity to allow for pipes and then place them in their proper position. Attach the vanity to the wall with screws. The sink can be added later.
It will take some work in replacing your old pedestal sink with a bathroom vanity. Your beautiful new bathroom will be worth it all. Continue reading to learn how to complete each of these jobs correctly.
How to remove the pedestal sink
It is impossible to install your bathroom vanity without removing your pedestal sink. These are the steps when you are planning on replacing your pedestal sink.
Get the tools ready for sink removal
To remove the pedestal sink, you will need pliers and a wrench. A putty knife or hammer may be required depending on the installation of your pedestal sink.
Turn off the water supply
Look under the sink to locate the water supply valves. Turn them off, then place buckets underneath.
Grab your pliers and remove the hose from the faucet. Also, disconnect the supply valves from the hoses. Let any water that is still in the buckets fall into them.
Get the P-Trap
Locate the P-trap underneath the sink. Look for the nut just above the water. Place another bucket underneath the P-trap before you start to work on that nut. Now you can remove the trap by either using your pliers or your hand.
Remove the sealant
Grab your utility knife to remove the sealant from the pedestal sink. Remove the sealant from the base and around the sink.
Remove the pedestal sink by loosening the mounting nuts
Now you can begin to remove the sink. You can ask a friend or relative to help you grab the sink while using your wrench to loosen the mounting nuts. After the mounting nuts have been removed, the sink may fall to the ground so it is important to hold it up.
You can put the sink aside if you don’t plan to use it again. Also, you should remove any parts from the sink.
Get Rid of the Adhesive to Remove the Pedestal Sink
If the sink is glued to a wall, you will need a putty knife with a hammer. The putty knife should be inserted into the gap between the sink and the wall. Next, use a hammer to strike the sink gently. Continue to strike the putty knife with a hammer until the sink is freed.
Remove the pedestal base
Next, loosen the bolts connecting the pedestal base to the bathroom floor. This job should not be difficult with a wrench.
How to Install a Bathroom Vanity
Now it’s time to install your bathroom vanities. Although it will take more effort than removing the pedestal sink to install the vanity, it is still possible.
Get the tools for bathroom vanity installation
You will need a tape measure and a marker to properly install the vanity. You may also need a saw, shims, and a utility knife.
Find the Perfect Place for Your Bathroom Vanity
First, you must determine the best place for your bathroom vanity. You can start by using a tape measure and a marker to mark the area where your vanity will be placed. You may find instructions with your vanity that will help you make these measurements.
Next, use the stud finder to align your vanity with the load-bearing unit. You can then note the stud with your marker once you have found it.
Make Openings for Pipes
This is an optional step. You can check the vanity to see if there is an open back. To make the pipes accessible, cut through them with your saw.
To get an idea of the size of your openings, measure your pipes. Once you have taken the measurements, make openings slightly larger than your pipes. It would help if you made the openings slightly larger to allow the pipes to expand and move freely.
Place the bathroom vanity in its proper place
Before moving the bathroom vanity, take out the drawers and doors. They can get in the way of your bathroom vanity and cause damage, so take them out now.
Place the bathroom vanity in the appropriate spot. Make sure that it is aligned with your measurements. To check if your bathroom vanity is correctly aligned, use a level.
You can adjust the height of the vanity’s feet if it is too short. You will need to use shims to change some vanities that don’t have adjustable feet. Once the shims have been installed, remove any excess material to position the vanity correctly.
Get the bathroom vanity you want
Now, use your drill to cut through the bathroom wall and vanity until you reach the stud. You might need to change drill bits depending on the materials.
Grab some screws once the holes are made and attach your bathroom vanity using them. Wall anchors are an excellent way for homeowners to secure their bathroom vanity.
Adding a sink to your bathroom vanity
You are now close to finalizing your bathroom remodel. But there is one more thing you need to do. This is installing the sink in your bathroom vanity.
Installing the sink is more difficult than removing the pedestal sink and installing the bathroom vanity. Do-it-yourselfers can install the sink and seal it in place. It isn’t easy to connect the plumbing.
If you are an experienced plumber, you can install the sink within the vanity. Calling in professionals is a good idea for those with little experience working with plumbing.
This is a great opportunity to get new pipes. It is possible for the bathroom vanity to become damaged if they are not replaced in time. You don’t want to have to worry about the bathroom vanity for too long.
What are the Benefits of Having A Pedestal Sink In Your Bathroom?
Pedestal sinks are an older style of bathroom fixture. Pedestal sinks have been around for a long time, but they still offer many great features.
The best thing about pedestal sinks is their ability to fit in any bathroom. Pedestal sinks can be used in any size bathroom. They can also be used by homeowners who prefer their bathrooms open.
Additionally, pedestal sinks are very durable. As long as they are properly maintained, pedestal sinks can last for many decades. Although vanity sinks are quite durable, they may be less durable if the vanity is damaged.
A pedestal sink is also easier to maintain. To keep your pedestal sink in top condition, you can use your favorite cleaning product for the porcelain and fixtures. You don’t have to be concerned about the pedestal sink’s surroundings falling into disrepair.
What are the Benefits of a Vanity Sink in the Bathroom
Bathroom vanities with sinks have many positive aspects. These are important to consider when choosing the right type of sink for your bathroom.
The best reason when replacing a pedestal sink with a bathroom vanity sink is the extra storage space it provides. No matter how large your bathroom vanity is, it will offer more storage than a pedestal sink.
You can use this space to store items that you frequently need in the bathroom. You will be able to organize your bathroom more efficiently with the extra space. Homeowners can also create more attractive bathrooms with vanities. Vanities conceal the plumbing and can be used as decorative elements.
Pick A Toilet may collect a share of sales or other compensation from the links on this page.