Last Updated on November 14, 2022 by acechapman
Toilets are a major fixture in bathrooms. However, there may be questions about the standards for how close a toilet should be to a wall. Let’s take a closer look into the distances that a toilet should be in a bathroom.
The toilet flange is used to measure the distance between the toilet and the back wall. The minimum distance between a toilet and the wall should be at least 15 inches. Between the center of the toilet flanges and the back wall, you should allow a distance of between 12 to 12.5 inches. Before you install a toilet, make sure to check the local building codes. You may need to adjust the dimensions of your bathroom and the layout of the toilet.
You can learn how to install a toilet or what expert recommendations to use.
Toilet Placements
The toilet is an important fixture in the bathroom, it must be in a convenient location to use. Because they can be mounted between 15 and 19 inches above the floor, wall-hung toilets are an excellent choice for elderly adults who require comfort. Although they are more affordable and easy to install, floor-mounted toilets are more popular. However, they require more cleaning. The distance between the toilets and walls is determined by the type of toilet used, the layout of the bathroom, personal preference, and individual preference.
The fixture will be attached directly to the wall if the bathroom has a wall-hung toilet. Floor-mounted toilets often have a visible, direct pipe supply connection. A tank is also required. The rough-in is typically the most important measurement of a toilet or the back wall. If fixtures or walls surround the toilet, it must have sufficient clearance.
Installing A Toilet
For a good placement of a toilet, you will need to measure it. You should also consider aesthetics and access for routine cleaning. Also, think about how your toilet will affect your personal hygiene, comfort, and overall health.
Make sure your toilet meets all building codes. A rough-in can be anywhere from 10 to 14 inches. A toilet should not be more than 30 inches from another sanitary fixture. A cold water supply line is essential for a toilet. It should be clear of the base molding, and high enough from the ground. If the toilet is mounted on a wall, ensure that it is at an acceptable height. If it is floor-mounted, choose a comfortable seat height. Finally, ensure there is enough clearance between the sides and front of the toilet.
You don’t want to have any gaps between your toilet and the wall so make sure you maximize the space. Consider installing a towel rack or shelving, hanging plants, lighting, and bathroom artwork. The toilet you choose will set the tone for your bathroom. It should be aesthetically pleasing, and healthy, and contribute to hygiene.
Should the wall touch the back of your toilet?
It is up to the individual preference whether a toilet should touch a wall or not. There is no set rule. Some people will allow the top of a toilet tank to touch the back wall. Others prefer a minimum of 1 inch between the commode’s back wall and the toilet tank. The toilet should have at least a little clearance from the sides. However, it can touch a wall.
Can You Put A Toilet On An Outside Wall?
It is best to avoid living in areas where temperatures drop below freezing if you want to install a toilet outside. Additional insulation may be required in order to prevent pipes from freezing due to falling temperatures. Insulate the cold and hot water supply pipes for any toilet that is placed outside. To prevent freezing pipes, apply proper insulation to the wall.
How do I know the rough-in size of my toilet?
To ensure a seamless installation and upgrades to your bathroom, it is essential to know what the rough-in size of your toilet is. The rough-in measures the distance between the wall and the back and center of the waste pipe and toilet. Before you calculate the rough-in, make sure to measure the clearance between the wall and the toilet. Also, determine the distance from the wall where you will place the flange, where the water supply pipe will be located, and the space for the bowl’s front.
A standard rough-in for a toilet measures 12 inches. However, some toilets require a rough-in between 10 and 14 inches. Before you purchase and install a toilet, make sure to measure the space.
Are Wall-hung toilets a problem?
Do your research to find a certified plumber or contractor who can install a wall-hung bathroom toilet. Because they can be adjusted in height, are sleek and modern, and take up less space, wall-hung toilets are very popular in bathrooms. Wall-mounted toilets can be more costly than floor-mounted ones. Wall-mounted toilets are more difficult to install and could cause damage to walls if it is not done correctly or the weight limit is exceeded.
If you see signs of leakage or if the bolts to mount a wall-mounted bathroom aren’t secure, don’t hesitate. If in doubt, contact a professional to get assistance.
Is it hard to move a toilet?
If you’re not familiar with plumbing or renovations, it is best to hire professionals to move a toilet. It is more difficult than it seems. You will need to remove walls and ceilings, relocate pipes, and adjust the flooring.
If you’re renovating your bathroom, it is the best time to move a toilet. Hire a licensed, certified plumber to move a toilet. To move a toilet, expect to pay between $2500 and $3,500. Drains, vents, flooring, and plumbing may need augmentation.
Wrapping up
We hope you will feel more confident in your knowledge of toilets. You will need to be familiar with the measurements of the rough-in and the allowances between the walls and the toilet.
If you are unsure, hire a professional to help with your toilet installation or bathroom renovation. Although many toilets appear simple to install, it may be necessary to relocate pipes, add insulation to the plumbing, or change the flooring.
Pick A Toilet may collect a share of sales or other compensation from the links on this page.
